![]() The oil flows to the accumulator, which has compressed nitrogen gas on the other side. Basically, as the boom bounces, it pushes down on the oil in the hydraulic cylinders. The higher the pressure, the more stored energy in the gas, then the stored energy acts like a spring to absorb shock, a perfect fit for mobile equipment with very demanding high force loads. Hydraulic accumulators store energy in the form of pressurized gas. When Ride Control is disabled, the lift function operates as a standard machine in any operating condition Ride Valve, Ride Tank Valve and Float Valve (if equipped) remain in the de-energized state and the Precision Gravity Lowering Components and Main Control Valve Spool fully control the lift cylinder. In this manner, any change in the load due to external forces transfers via the lift cylinder to the nitrogen gas inside the accumulator (s). In active mode, the Ride Tank Valve and Ride Valve are energized, connecting the bore side of the lift cylinder to the accumulator (s) and the rod end of the lift cylinder to the hydraulic tank. When the input switch is enabled by the operator and speeds are above 3 mph the ride control system is active. The operator input switch allows two states: Ride Control Enabled or Ride Control Disabled. The system includes one or more accumulators, a cylinder-mounted ride control valve, a tank valve, switches to set desired operation mode, and appropriate wire harnessing. The Ride Control System is a boom suspension system that permits the boom, and thus the load on the fork/carriage, to absorb and dissipate energy induced by undulations in terrain when operating the telehandler while driving. It is not just comfortable maneuvering of a load in the machine that is important it is also confidence while operating for improved productivity. It does not offer any added cushion or comfort for the operator, but it can help improve productivity by reducing damage to the load and allowing operators to quickly move over changing terrain without load stability worries. It cushions the ride for the load on the forks when the machine is traversing rough terrain. Ride control acts as a spring between the boom and the frame of the machine. When switched on, machine movements are less jarring increasing operator confidence. Ride Control allows operators with any level of experience to move materials easier through the linear movement of the boom. Telehandler operators have been searching for a solution that would give precise boom control when paired with a boom suspension (ride control) system. ![]() ![]() Plus, their ability to handle heavy, bulky loads makes them ideal for performing maintenance on other machines in the rental yard. Telescopic Handlers, with a wide range of specialized attachments, can adapt to demanding job sites and replace other traditional machines. Industries like wind, oil and gas, steel erection, industrial construction, and mining present unique challenges to equipment operators. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |